Craft carpentry and joinery - Craft Site Carpenter

Awareness of health, safety and welfare regulations, standards, and guidance and impact on role of the team and other construction trades . Employer and employee responsibilities. Control of Substances Hazardous to Health (CoSHH). Fire safety and Fire door legislation. Health and Safety at Work Act. Asbestos awareness. Manual handling. Signage and notices. Fire extinguishers. Situational awareness. Slips, trips, and falls. Working in confined spaces. Working at height. Electrical safety. Reporting injuries, diseases and dangerous occurrences regulations (RIDDOR), Provision and use of work equipment regulations (PUWER) & near miss reporting.

Types incidents - accidents, near misses. Mitigation methods. Incident management techniques.

Safe systems of work, control measure implementation and monitoring techniques.

Safety Control equipment and safety techniques: Personal protective equipment (PPE), respiratory protective equipment (RPE) and local exhaust ventilation (LEV).

Environmental management systems and standards. Environmental Protection Act, types of pollution and control measures: water, noise, air pollution, smells, spills, waste and disposal of hazardous waste.

The principles of building construction: Fire safety, fire doors and linings, fire stopping, water ingress. Staircases, security requirements for external doors and windows. Vapour barriers, breathable membranes and sound proofing.

Methods of interpreting information from drawings, specifications, the production plan and producing work instructions, utilising traditional and digital methods.

Resource quantity calculation techniques, costing, wastage and recycling allowance.

The importance and considerations of the environment: U values, R Values, thermal bridging, airtightness, acoustic performance and thermal performance requirements of carpentry and joinery components.

Standards and regulations associated with carpentry and joinery: British standards, building regulations, warranty provider standards.

Written communication techniques. Plain English principles.

Documentation methods and requirements - digital and paper based.

Different energy efficiencies of insulation products and common construction methods sustainable principles associated with timber, manufactured timber-based products and associated materials.

Purpose and use of digital design and modelling systems in carpentry and joinery.

The principles of heritage building, considerations, like for like replacement and other techniques applicable to the carpenter and joiner.

Planning, work scheduling, and time management techniques for self and others.

Quality assurance requirements and monitoring techniques.

Stock, material stock and considerations: Availability, stock lead times. Correct handling to prevent damage. Stock value. Faulty stock and returns process, stock rotation and quality control.

Well-being: Mental and physical health considerations in self and others and how to access support.

Hand and portable power tools for non-standard and angled carpentry and joinery work.

CAJ: Computer numerically controlled (CNC) machinery: Setting up and operating method and techniques.

CAJ: Manufacture and assembly techniques for bespoke windows with shaped joints, curves and non standard (non – 90 degree) window bars.

CAJ: Manufacture and assembly techniques for complex timber second fix products: 1. fire doors 2. shaped, non-standard doors 3. bespoke wall and floor units (commissioned order with features or like for like replacement).

CAJ: Manufacture and assembly techniques for complex timber first fix products: 1. staircases with turns 2. fire door linings, 3. bespoke windows with non standard (non-90 degree) angles, 4. shaped non standard door linings.

CAJ: Techniques to create shaped work using specialist jigs and fixed machinery.

CAJ: Techniques for forming shaped woodworking joints.

Inclusion, equity and diversity in the workplace.

CSC: Complex first fixing techniques: 1. fire door linings, 2. floor coverings with non-standard angle returns and 3. structural partitions.

CSC: Complex second fixing techniques: 1. bespoke wall and floor units (commissioned order with features or like for like replacement), 2. worktops with masons mitre, 3. cornices and fitments, 4. spindles and handrails to stairs with turns, 5. hang fire doors. 6. service encasements with access panels.

CSC: Complex first fixing techniques carpentry techniques: Stud partitions with standard and non standard (non-90 degree) turns.

CSC: Complex second fixing techniques carpentry techniques: Double side hung doors with linings and associated ironmongery. Non-standard mouldings.

CSC: Complex roofing techniques: Form dormer windows to roofs and how to construct traditional cut roofs and prefabricated (trusses) with hips and valleys.

CSC: Carpentry maintenance and repair techniques: External doors and frames, structural timbers, sash window cords, timber guttering and fixings, window frames and glazing.

CSC: Non-standard (non – 90 degree) joint forming techniques.

Comply with health and safety regulations, standards, and guidance.

Identify and use safety control equipment including RPE, dust suppression, PPE and LEV.

Implement and monitor safe systems of work and control measures.

Interpret and extract information using paper based or digital techniques from drawings, specifications and provide work instructions.

Calculate resource and cost quantities from site measurements.

Apply environmental and sustainable principles in compliance with regulations, standards and systems for example segregate resources for reuse, recycling and disposal.

Apply planning, work scheduling and time management techniques to identify and agree production plan targets.

Apply quality assurance procedures.

Select, check and use hand and power tools.

Complete documentation - paper based or digital. For example, job sheets, time sheets, risk assessments, method statements, equipment service records, handover documents, work sheets, checklists, incident reports, requisition sheets, quality records.

Communicate and report in written form any issues against the production plan and contribute to the solutions.

Obtain, monitor and rotate stock and supplies.

CAJ: Set out, mark out and form curved joinery products.

CAJ: Form shaped wood working joints.

CAJ: Set up and use CNC machinery to produce joinery products.

CAJ: Apply craft architectural joinery techniques to manufacture and assemble a window frame with, curved head and non-standard (non–90 degree) window bars.

CAJ: Apply craft architectural joinery techniques and practices to manufacture and assemble complex timber second fix products: 1. fire doors 2. shaped , non-standard doors 3. bespoke wall and floor units (commissioned order with features or like for like replacement).

CAJ: Apply craft architectural joinery techniques and practices to manufacture and assemble complex timber first fix products: 1. staircases with turns 2. fire door linings, 3. bespoke windows with non-standard (non–90 degree) angles, 4. shaped, non-standard door linings.

CAJ: Apply craft architectural techniques to create shaped work using specialist jigs and fixed machinery.

CSC: Apply craft site first fix carpentry techniques and practices to install timber stud partitions with standard and non-standard (non–90 degree) turns.

CSC: Apply craft site carpentry techniques and practices to install complex first fix elements: 1. fire door linings, 2. floor coverings with non-standard (non–90 degree) returns and 3. structural partitions.

CSC: Apply craft site second fix carpentry techniques and practices to install double side hung doors with associated ironmongery and lining. Non-standard (non–90 degree) mouldings.

CSC: Apply craft site carpentry techniques and practices to install complex second fix elements: 1. bespoke wall and floor units (commissioned order with features or like for like replacement), 2. worktops with masons mitre, 3. cornices and fitments, 4. spindles and handrails to stairs with turns, 5. fire doors. 6. service encasements with access panels, 7. non-standard (non-90 degree) door linings.

CSC: Apply craft site carpentry techniques and practices to erect trussed or traditional roofs rafter roofs with hips, valleys and dormers.

CSC: Form non-standard (non–90 degree) joints.

CSC: Replace or repair carpentry work, for example, structural timbers doors, glazing, window frames and sills, mouldings, timber guttering and fixings or sash window cords.

Support an inclusive culture.

Take responsibility for the quality of work and encourage others to work to high standards.

Collaborate and promote teamwork across disciplines and external stakeholders.

Committed to continued professional development (CPD) to maintain and enhance competence in their own area of practice.

Promotes health, safety, environment and sustainability principles to others.

Take personal responsibility for their own health and safety.